|
|
Sheet Plate
/ Standard Thickness Tolerances
Alloys 2014, 2024, 2124, 2219, 2324, 2419, 7050, 7150, 7178, 7475
Note: Also applicable to the alloys listed when supplied as ALCLAD.
| |
Specified Width (Inches) |
|
Specified Thickness (Inches) |
Up thru 39.37 |
Over 39.37 thru 47.24 |
Over 47.24 thru 55.12 |
Over 55.12 thru 59.06 |
Over 59.06 thru 70.87 |
Over 70.87 thru 78.74 |
Over 78.74 thru 86.61 |
Over 86.61 thru 98.43 |
Over 98.43 thru 118.11 |
Over 118.11 thru 137.80 |
Over 137.80 thru 157.48 |
Over 39.37 thru 47.24 |
| Over |
Thru |
|
0.0059 |
0.010 |
0.0010 |
0.0010 |
0.0020 |
0.0020 |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
| 0.010 |
0.016 |
0.0015 |
0.0015 |
0.0025 |
0.0025 |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
0.016 |
0.025 |
0.0015 |
0.0015 |
0.0025 |
0.0025 |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
| 0.025 |
0.032 |
0.0015 |
0.0015 |
0.0020 |
0.0030 |
0.0030 |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
0.032 |
0.039 |
0.0015 |
0.0015 |
0.0020 |
0.0030 |
0.0030 |
0.0035 |
0.0035 |
0.007 |
-- |
-- |
-- |
-- |
| 0.039 |
0.047 |
0.0020 |
0.0020 |
0.0020 |
0.0030 |
0.0030 |
0.0035 |
0.0035 |
0.008 |
0.010 |
0.011 |
-- |
-- |
|
0.047 |
0.063 |
0.0020 |
0.0020 |
0.0030 |
0.0030 |
0.0030 |
0.0035 |
0.0035 |
0.009 |
0.011 |
0.013 |
-- |
-- |
| 0.063 |
0.079 |
0.0020 |
0.0020 |
0.0030 |
0.0035 |
0.0035 |
0.0035 |
0.0035 |
0.010 |
0.013 |
0.015 |
-- |
-- |
|
0.079 |
0.098 |
0.0020 |
0.0020 |
0.0035 |
0.0040 |
0.0040 |
0.0045 |
0.0045 |
0.011 |
0.015 |
0.018 |
-- |
-- |
| 0.098 |
0.126 |
0.0035 |
0.0035 |
0.0035 |
0.0045 |
0.0045 |
0.0045 |
0.0045 |
0.013 |
0.016 |
0.020 |
-- |
-- |
|
0.126 |
0.158 |
0.0040 |
0.0040 |
0.0045 |
0.007 |
0.007 |
0.009 |
0.009 |
0.015 |
0.018 |
0.022 |
-- |
-- |
| 0.158 |
0.197 |
0.0055 |
0.007 |
0.007 |
0.009 |
0.009 |
0.011 |
0.011 |
0.018 |
0.022 |
0.026 |
-- |
-- |
|
0.197 |
0.246 |
0.009 |
0.012 |
0.012 |
0.012 |
0.017 |
0.017 |
0.021 |
0.021 |
0.025 |
0.029 |
-- |
-- |
| 0.246 |
0.315 |
0.012 |
0.015 |
0.015 |
0.015 |
0.019 |
0.019 |
0.024 |
0.024 |
0.029 |
0.033 |
0.041 |
0.051 |
|
0.315 |
0.394 |
0.017 |
0.018 |
0.018 |
0.018 |
0.022 |
0.022 |
0.028 |
0.028 |
0.033 |
0.039 |
0.047 |
0.059 |
| 0.394 |
0.630 |
0.023 |
0.023 |
0.023 |
0.023 |
0.028 |
0.028 |
0.033 |
0.033 |
0.039 |
0.047 |
0.059 |
0.070 |
|
0.630 |
0.984 |
0.031 |
0.031 |
0.031 |
0.031 |
0.037 |
0.037 |
0.043 |
0.043 |
0.051 |
0.060 |
0.070 |
0.085 |
| 0.984 |
1.575 |
0.039 |
0.039 |
0.039 |
0.039 |
0.047 |
0.047 |
0.055 |
0.055 |
0.065 |
0.075 |
0.090 |
0.105 |
|
1.575 |
2.362 |
0.055 |
0.055 |
0.055 |
0.055 |
0.060 |
0.060 |
0.070 |
0.070 |
0.090 |
0.100 |
0.115 |
-- |
| 2.362 |
3.150 |
0.075 |
0.075 |
0.075 |
0.075 |
0.085 |
0.085 |
0.100 |
0.100 |
0.110 |
0.125 |
-- |
-- |
|
3.150 |
3.937 |
0.100 |
0.100 |
0.100 |
0.100 |
0.115 |
0.115 |
0.130 |
0.130 |
0.150 |
0.160 |
-- |
-- |
| 3.937 |
6.299 |
0.130 |
0.130 |
0.130 |
0.130 |
0.145 |
0.145 |
0.165 |
0.165 |
-- |
-- |
-- |
-- |
Note: Capability to
provide tighter tolerances may vary with supplier.
When a dimension tolerance is specified other than as an equal
bilateral tolerance, the value of the standard tolerance is that
which applies to the mean of the maximum and minimum dimensions
under the tolerance for the dimension under consideration. |
|
Home | Services | Company | Our Clients | Photo Gallery | Quality Policy | Contact Us
AS9100:2004 and ISO 9001:2000 Certified
© Copyright 2001-2007 Aircraft Stamping
Company Inc., All rights reserved. Terms and Conditions
|
